K2 Systems PV Universal Middle Clamp Set MiniClamp for trapezoidal sheet 30-50mm

Universal center clamp set for attaching solar modules to K2 MiniRail, MicroRail, Dome 6 or Dome V systems including screw and spring.
Material: aluminum (EN AW 6063 T66, EN AW 6082 T6), stainless steel (1.4301)

Please select the desired color above.

We can only order this K2 Systems product for you with a minimum order value of €500 net (total of all K2 products). Unfortunately, we must cancel K2 Systems orders with a lower value.

You will also need additional end clamps .

Advantages of the MiniRail system

The MiniRail mounting system for PV systems from K2 Systems was specifically developed for trapezoidal sheet metal roofs . It impresses with its simplicity and versatility. Its few components allow for quick and easy module orientation changes.

• The innovative short rail system is structurally optimized. Installation is quick and easy.
• Universal module clamp and module alignment : The universal module clamp can be rotated by 90°, allowing landscape and portrait mounting as a grid mounting.
• 5° elevation with MiniFive: This leads to higher yield due to the optimized radiation angle and improved rear ventilation.
• The assembly system is optimized for storage and transport, giving you a high level of planning security .

Technical data: MiniRail System

Application area: Pitched roofs with trapezoidal sheeting or sandwich panels, roof pitch: 5?-?75°

Module orientation: horizontal or vertical

Material: Aluminum (EN AW-6063 T66 / EN AW-6082 T6); EPDM

MiniRail dimensions: 385 mm long x 78.2 mm wide x 23 mm high

Fastening: Screwing into the roof covering with self-tapping thin sheet screws

Elevation with MiniFive: approx. 5°

Requirements:

• Sheet thickness: = 0.5 mm (steel and aluminum)
• Sandwich panels: Manufacturer approval required
• Flat support around the drill hole: Ø = 20 mm
• Frame height modules: 30-50 mm
• Bead width: at least 22 mm (output of the project-specific minimum dimension in the Base On Report)
• High bead spacing: 101?-?350?mm depending on bead width

K2 Base: Plan your mounting system online

With the free online software K2 Base, you can conveniently plan your mounting system online. The software is always up-to-date and platform-independent, accessible via your internet browser.

The planning is based on satellite images from Google Maps . Graphic drawing tools for roofs and module arrays, as well as precise load and ballast planning , are also available. At the end of the process, you will receive a project plan as a PDF containing, among other things, the project data, the assembly plan, the item list, and the structural analysis .

As our customer, you can simply enter "inutec solarcenter" under "Company" when registering with Base.

Downloads - K2 Systems mounting system trapezoidal sheet metal

Data Sheet - Minirail System (PDF, 601 KB)