K2 MiniRail MK2

Update for the K2 trapezoidal sheet system: Now with MK2 rail channel

Short rail for mounting solar modules on trapezoidal sheet metal roofs.
Including thread-forming screws with sealing washer 6x25 mm.
Material: aluminum EN AW-6063 T66, EPDM, stainless steel A2
Length: 0.385 m

You will also need the universal middle and end clamps,

Advantages of the MiniRail system

The MiniRail mounting system for PV systems from K2 Systems was specifically developed for trapezoidal sheet metal roofs . It impresses with its simplicity and versatility. Its few components allow for quick and easy module orientation changes.

• The innovative short rail system is structurally optimized. Installation is quick and easy.
• Universal module clamp and module alignment : The universal module clamp can be rotated by 90°, allowing landscape and portrait mounting as a grid mounting.
• 5° elevation with MiniFive: This leads to higher yield due to the optimized radiation angle and improved rear ventilation.
• The assembly system is optimized for storage and transport, giving you a high level of planning security .

Technical data: MiniRail System

Application area: Pitched roofs with trapezoidal sheeting or sandwich panels, roof pitch: 5?-?75°

Module orientation: horizontal or vertical

Material: Aluminum (EN AW-6063 T66 / EN AW-6082 T6); EPDM

MiniRail dimensions: 385 mm long x 85 mm wide x 31 mm high

Fastening: Screwing into the roof covering with self-tapping thin sheet screws

Elevation with MiniFive: approx. 5°

Requirements:

• Sheet thickness: = 0.5 mm (steel and aluminum)
• Sandwich panels: Manufacturer approval required
• Flat support around the drill hole: Ø = 20mm
• Frame height modules: 30-50mm
• Bead width: at least 22mm (output of the project-specific minimum dimension in the Base On Report)
• High bead spacing: 101-350mm depending on bead width

K2 Base: Plan your mounting system online

With the free online software K2 Base, you can conveniently plan your mounting system online. The software is always up-to-date and can be used across all platforms via your internet browser.

The planning is based on satellite images from Google Maps . Graphic drawing tools for roofs and module arrays, as well as precise load and ballast planning , are also available. At the end of the process, you will receive a project plan as a PDF containing, among other things, the project data, the assembly plan, the item list, and the structural analysis .

As our customer, you can simply enter "inutec solarcenter" under "Company" when registering with Base.

Downloads - K2 Systems mounting system trapezoidal sheet metal

Data Sheet - Minirail System (PDF, 601 KB)