The EasySolar-II GX uses unused PV power to charge the batteries or feed power back to the grid. It discharges the battery or uses grid power to compensate for a lack of PV power. If a power outage occurs, the EasySolar-II GX disconnects the grid connection while maintaining a continuous, uninterrupted power supply . Loads that should be turned off due to a lack of AC input can be connected to a second output. These loads are controlled by the PowerControl and PowerAssist to limit the AC input to a safe level.

A solution for all cases

The Victron EasySolar-II GX includes the following components:

- A MultiPlus II inverter/charger
- A SmartSolar MPPT-Tr solar charge controller
- One GX device with 2x 16 character display

These components are pre-wired and built into a single unit. This greatly simplifies most installations and saves time and money .
  

Display and Wi-Fi

The display provides information about the battery, inverter, and solar charge controller. Conveniently, each individual component can be accessed using a smartphone or any other Wi-Fi device , making configurations or changes easy from these devices.
 

Solar charge controller

The DC output of the SmartSolar MPPT is connected in parallel with the DC connection of the MultiPlus-II inverter/charger. The MultiPlus-II's on/off mechanism also controls the SmartSolar MPPT.

 

GX device

The integrated GX device includes a VE.Can interface , which can be used to connect other VE devices. The port can also be reconfigured via the remote console for use with a compatible CAN bus Li-ion battery. The GX device controls the MultiPlus-II and the SmartSolar MPPT, each with a VE.Bus and a VE.Direct connection.